Dual RCA to Dual XLR Male Cable – DJ Controller to Powered Speakers (1.5m / 3m)

The one-cable fix for the most common DJ setup problem: your controller or mixer has RCA outputs, but your powered speakers or PA have XLR inputs. This stereo lead goes straight from the left/right RCA master output to the XLR inputs on two speakers — no adaptors needed.

Choose your length

• 1.5m — speakers on the same table as the controller
• 3m — speakers on stands either side of the DJ table

Specifications

• Connectors: 2 × RCA male (red/white) to 2 × 3-pin XLR male
• Length: 1.5m or 3m
• Colour: black
• Conductors: 4N oxygen-free copper (OFC)
• Shielded cable, gold-plated RCA plugs
• Signal: unbalanced stereo (left + right)

Works with

• DJ controllers and mixers with RCA master/booth out (Pioneer DDJ, Numark, Hercules, Denon and similar)
• Powered speakers, PA speakers, subwoofers and amps with XLR inputs

Tip: for runs longer than about 3m, a balanced XLR or TRS output gives lower noise — see our DJ Cable Connection Guide.

In the box

• 1 × dual RCA to dual XLR male cable in your chosen length

In stock in Auckland and shipped fast NZ-wide.